BB Action new 1202
// ============================================================================
// CONSOLIDATED VALIDATION LOGIC (INITIAL CHECK)
// Runs first to ensure the user-selected action is allowed.
// NOTE: This must be configured as a 'Before Update' trigger.
// ============================================================================
def FORBIDDEN_VALUES = [
'MAV_DIR_BB_ACTION_1003',
'MAV_DIR_BB_ACTION_1000',
'MAV_DIR_BB_ACTION_1001',
'MAV_DIR_BB_ACTION_1002'
]
def newBBActionValue = BBActionManual_c
if (
FORBIDDEN_VALUES.contains(newBBActionValue) ) {
println("Selected BB Action value cannot be changed. It is restricted. Throwing ValidationException.")
// Using throw new ValidationException to display a professional error message to the user.
throw new oracle.jbo.ValidationException("BB Action value cannot be changed to selected value manually. It is restricted. Please select another value.");
}
// ============================================================================
// MAIN BUSINESS LOGIC STARTS HERE
// All sections now check against BBActionManual_c
// ============================================================================
// ============================================================================
// SECTION 1: Approve Beginning Balance (Pay Full Amount)
// Action Code: MAV_DIR_BB_ACTION_1006
// ============================================================================
if (BBActionManual_c == 'MAV_DIR_BB_ACTION_1006') {
println("[BBAction Trigger] Action: Approve Beginning Balance (Pay Full Amount)")
println("[BBAction Trigger] IncentiveType: ${IncentiveType_c}")
// Verify the Incentive Type condition (COMMISSION or BONUS, not SPIFF)
if (IncentiveType_c == 'COMMISSION' || IncentiveType_c == 'BONUS') {
println("[BBAction Trigger] Clearing BBReasonCode and BBMPAComment")
BBMPAComment_c = null
BBReasonCode_c = null
MPAReasonCode_c = null
println("[BBAction Trigger] Section 1 completed successfully")
} else {
println("[BBAction Trigger] IncentiveType not COMMISSION or BONUS - skipping")
}
}
// ============================================================================
// SECTION 2: Hold Beginning Balance (Full BB on Hold Until next month)
// Action Code: MAV_DIR_BB_ACTION_1007
// ============================================================================
if (BBActionManual_c == 'MAV_DIR_BB_ACTION_1007') {
println("[BBAction Trigger] Action: Hold Beginning Balance")
println("[BBAction Trigger] IncentiveType: ${IncentiveType_c}")
println("[BBAction Trigger] BeginningBalance: ${BeginningBalance_c}")
// Verify the Incentive Type condition (COMMISSION or BONUS, not SPIFF)
if (IncentiveType_c == 'COMMISSION' || IncentiveType_c == 'BONUS') {
println("[BBAction Trigger] Clearing BBReasonCode and BBMPAComment")
BBMPAComment_c = null
BBReasonCode_c = null
MPAReasonCode_c = null
// Calculate reverse of CED: (-1) * CED_c
def reverseCED_c = -1 * (CED_c ?: 0) // as par discussionwith Srini 1-December-25
println("[BBAction Trigger] Calculated reverseCED_c: ${reverseCED_c}")
println("[BBAction Trigger] Setting ExpectedPaymentAmount to PTDEarnings: ${PTDEarnings_c}")
ExpectedPaymentAmount_c = PTDEarnings_c
// Set MPAGenerated only if value is different (avoid validation threshold)
println("[BBAction Trigger] Setting MPAGenerated")
MPAGenerated_c = ExpectedPaymentAmount_c + reverseCED_c
// Set MPAStatus_c to 'Auto approved'
if (MPAStatus_c != 'Auto approved') {
println("[BBAction Trigger] Setting MPAStatus from '${MPAStatus_c}' to 'Auto approved'")
MPAStatus_c = 'Auto approved'
} else {
println("[BBAction Trigger] MPAStatus already 'Auto approved' - no change needed")
}
// Set RecoverableFlagV1_c to 'Y'
if (RecoverableFlagV1_c != 'Y') {
println("[BBAction Trigger] Setting RecoverableFlagV1 from '${RecoverableFlagV1_c}' to 'Y'")
RecoverableFlagV1_c = 'Y'
} else {
println("[BBAction Trigger] RecoverableFlagV1 already 'Y' - no change needed")
}
println("[BBAction Trigger] Section 2 completed successfully")
} else {
println("[BBAction Trigger] IncentiveType not COMMISSION or BONUS - skipping")
}
}
// ============================================================================
// SECTION 3: REC Payout Adjustment (Analyst needs to fill in Expected Payout)
// Action Code: MAV_DIR_BB_ACTION_1008
// ============================================================================
if (BBActionManual_c == 'MAV_DIR_BB_ACTION_1008') {
println("[BBAction Trigger] Action: REC Payout Adjustment")
println("[BBAction Trigger] IncentiveType: ${IncentiveType_c}")
println("[BBAction Trigger] CED: ${CED_c}")
// Verify the Incentive Type condition (COMMISSION or BONUS, not SPIFF)
if (IncentiveType_c == 'COMMISSION' || IncentiveType_c == 'BONUS') {
println("[BBAction Trigger] Clearing BBReasonCode and BBMPAComment")
BBMPAComment_c = null
BBReasonCode_c = null
MPAReasonCode_c = null
// Calculate reverse of CED: (-1) * CED_c
def reverseCED = -1 * (CED_c ?: 0)
println("[BBAction Trigger] Calculated reverseCED: ${reverseCED}")
// Set MPAGenerated only if value is different (avoid validation threshold)
if (MPAGenerated_c != reverseCED) {
println("[BBAction Trigger] Setting MPAGenerated from ${MPAGenerated_c} to ${reverseCED}")
MPAGenerated_c = reverseCED
} else {
println("[BBAction Trigger] MPAGenerated already equals ${reverseCED} - no change needed")
}
// Set ExpectedPaymentAmount to null (analyst to input)
println("[BBAction Trigger] Setting ExpectedPaymentAmount to null (analyst input required)")
ExpectedPaymentAmount_c = null
// Set RecoverableFlagV1_c to 'Y'
if (RecoverableFlagV1_c != 'Y') {
println("[BBAction Trigger] Setting RecoverableFlagV1 from '${RecoverableFlagV1_c}' to 'Y'")
RecoverableFlagV1_c = 'Y'
} else {
println("[BBAction Trigger] RecoverableFlagV1 already 'Y' - no change needed")
}
println("[BBAction Trigger] Section 3 completed successfully")
} else {
println("[BBAction Trigger] IncentiveType not COMMISSION or BONUS - skipping")
}
}
// ============================================================================
// SECTION 4: NNREC Payout Adjustment (Analyst needs to fill in Expected Payout)
// Action Code: MAV_DIR_BB_ACTION_1009
// ============================================================================
if (BBActionManual_c == 'MAV_DIR_BB_ACTION_1009') {
println("[BBAction Trigger] Action: NNREC Payout Adjustment")
println("[BBAction Trigger] IncentiveType: ${IncentiveType_c}")
println("[BBAction Trigger] CED: ${CED_c}")
// Verify the Incentive Type condition (COMMISSION or BONUS, not SPIFF)
if (IncentiveType_c == 'COMMISSION' || IncentiveType_c == 'BONUS') {
println("[BBAction Trigger] Clearing BBReasonCode and BBMPAComment")
BBMPAComment_c = null
BBReasonCode_c = null
MPAReasonCode_c = null
// Calculate reverse of CED: (-1) * CED_c
def reverseCED = -1 * (CED_c ?: 0)
println("[BBAction Trigger] Calculated reverseCED: ${reverseCED}")
// Set MPAGenerated only if value is different (avoid validation threshold)
if (MPAGenerated_c != reverseCED) {
println("[BBAction Trigger] Setting MPAGenerated from ${MPAGenerated_c} to ${reverseCED}")
MPAGenerated_c = reverseCED
} else {
println("[BBAction Trigger] MPAGenerated already equals ${reverseCED} - no change needed")
}
// Set ExpectedPaymentAmount to null (analyst to input)
println("[BBAction Trigger] Setting ExpectedPaymentAmount to null (analyst input required)")
ExpectedPaymentAmount_c = null
// Set MPAStatus_c to 'Manual approval'
if (MPAStatus_c != 'Manual approval') {
println("[BBAction Trigger] Setting MPAStatus from '${MPAStatus_c}' to 'Manual approval'")
MPAStatus_c = 'Manual approval'
} else {
println("[BBAction Trigger] MPAStatus already 'Manual approval' - no change needed")
}
// Set RecoverableFlagV1_c to 'N'
if (RecoverableFlagV1_c != 'N') {
println("[BBAction Trigger] Setting RecoverableFlagV1 from '${RecoverableFlagV1_c}' to 'N'")
RecoverableFlagV1_c = 'N'
} else {
println("[BBAction Trigger] RecoverableFlagV1 already 'N' - no change needed")
}
println("[BBAction Trigger] Section 4 completed successfully")
} else {
println("[BBAction Trigger] IncentiveType not COMMISSION or BONUS - skipping")
}
}
// ============================================================================
// SECTION 5: NNREC Payout Adjustment - COMMISSION Only
// Action Code: MAV_DIR_BB_ACTION_1010
// ============================================================================
if (BBActionManual_c == 'MAV_DIR_BB_ACTION_1010') {
println("[BBAction Trigger] Action: NNREC Payout Adjustment (COMMISSION/BONUS Mixed Logic)")
println("[BBAction Trigger] IncentiveType: ${IncentiveType_c}")
println("[BBAction Trigger] CED: ${CED_c}")
// Verify the Incentive Type condition (COMMISSION only)
if (IncentiveType_c == 'COMMISSION') {
println("[BBAction Trigger] Clearing BBReasonCode and BBMPAComment")
BBMPAComment_c = null
BBReasonCode_c = null
MPAReasonCode_c = null
// Calculate reverse of CED: (-1) * CED_c
def reverseCED = -1 * (CED_c ?: 0)
println("[BBAction Trigger] Calculated reverseCED: ${reverseCED}")
// Set MPAGenerated only if value is different (avoid validation threshold)
if (MPAGenerated_c != reverseCED) {
println("[BBAction Trigger] Setting MPAGenerated from ${MPAGenerated_c} to ${reverseCED}")
MPAGenerated_c = reverseCED
} else {
println("[BBAction Trigger] MPAGenerated already equals ${reverseCED} - no change needed")
}
// Set ExpectedPaymentAmount to null (analyst to input)
println("[BBAction Trigger] Setting ExpectedPaymentAmount to null (analyst input required)")
ExpectedPaymentAmount_c = null
// Set MPAStatus_c to 'Manual approval'
if (MPAStatus_c != 'Manual approval') {
println("[BBAction Trigger] Setting MPAStatus from '${MPAStatus_c}' to 'Manual approval'")
MPAStatus_c = 'Manual approval'
} else {
println("[BBAction Trigger] MPAStatus already 'Manual approval' - no change needed")
}
// Set RecoverableFlagV1_c to 'N'
if (RecoverableFlagV1_c != 'N') {
println("[BBAction Trigger] Setting RecoverableFlagV1 from '${RecoverableFlagV1_c}' to 'N'")
RecoverableFlagV1_c = 'N'
} else {
println("[BBAction Trigger] RecoverableFlagV1 already 'N' - no change needed")
}
println("[BBAction Trigger] Section 5 completed successfully")
} else {
println("[BBAction Trigger] IncentiveType not COMMISSION - skipping")
}
}
// ============================================================================
// SECTION 6 & 7: NNREC Payout Adjustment - BONUS with HR Status Conditions
// Action Code: MAV_DIR_BB_ACTION_1010 (BONUS scenarios)
// ============================================================================
if (BBActionManual_c == 'MAV_DIR_BB_ACTION_1010') {
println("[BBAction Trigger] Action: NNREC Payout Adjustment (BONUS)")
println("[BBAction Trigger] IncentiveType: ${IncentiveType_c}")
println("[BBAction Trigger] HRStatus: ${HRStatus_c}")
println("[BBAction Trigger] CED: ${CED_c}")
// Verify the Incentive Type condition (BONUS only)
if (IncentiveType_c == 'BONUS') {
// SECTION 6: HR Status = 'T' and CED > 0
if (HRStatus_c == 'T' && (CED_c ?: 0) > 0) {
println("[BBAction Trigger] Section 6: HRStatus='T' and CED>0")
println("[BBAction Trigger] Clearing BBReasonCode and BBMPAComment")
BBMPAComment_c = null
BBReasonCode_c = null
MPAReasonCode_c = null
// Calculate reverse of CED: (-1) * CED_c
def reverseCED = -1 * (CED_c ?: 0)
println("[BBAction Trigger] Calculated reverseCED: ${reverseCED}")
// Set MPAGenerated only if value is different (avoid validation threshold)
if (MPAGenerated_c != reverseCED) {
println("[BBAction Trigger] Setting MPAGenerated from ${MPAGenerated_c} to ${reverseCED}")
MPAGenerated_c = reverseCED
} else {
println("[BBAction Trigger] MPAGenerated already equals ${reverseCED} - no change needed")
}
// Set ExpectedPaymentAmount to 0
println("[BBAction Trigger] Setting ExpectedPaymentAmount to 0")
ExpectedPaymentAmount_c = 0
// Set MPAStatus_c to 'Auto approved'
if (MPAStatus_c != 'Auto approved') {
println("[BBAction Trigger] Setting MPAStatus from '${MPAStatus_c}' to 'Auto approved'")
MPAStatus_c = 'Auto approved'
} else {
println("[BBAction Trigger] MPAStatus already 'Auto approved' - no change needed")
}
// Set RecoverableFlagV1_c to 'N'
if (RecoverableFlagV1_c != 'N') {
println("[BBAction Trigger] Setting RecoverableFlagV1 from '${RecoverableFlagV1_c}' to 'N'")
RecoverableFlagV1_c = 'N'
} else {
println("[BBAction Trigger] RecoverableFlagV1 already 'N' - no change needed")
}
println("[BBAction Trigger] Section 6 completed successfully")
}
// SECTION 7: HR Status != 'T' and CED < 0
if (HRStatus_c != 'T' && (CED_c ?: 0) < 0) {
println("[BBAction Trigger] Section 7: HRStatus!='T' and CED<0")
println("[BBAction Trigger] Clearing BBReasonCode and BBMPAComment")
BBMPAComment_c = null
BBReasonCode_c = null
MPAReasonCode_c = null
// Calculate reverse of CED: (-1) * CED_c
def reverseCED = -1 * (CED_c ?: 0)
println("[BBAction Trigger] Calculated reverseCED: ${reverseCED}")
// Set MPAGenerated only if value is different (avoid validation threshold)
if (MPAGenerated_c != reverseCED) {
println("[BBAction Trigger] Setting MPAGenerated from ${MPAGenerated_c} to ${reverseCED}")
MPAGenerated_c = reverseCED
} else {
println("[BBAction Trigger] MPAGenerated already equals ${reverseCED} - no change needed")
}
// Set ExpectedPaymentAmount to null (analyst to input)
println("[BBAction Trigger] Setting ExpectedPaymentAmount to null (analyst input required)")
ExpectedPaymentAmount_c = null
// Set MPAStatus_c to 'Manual approval'
if (MPAStatus_c != 'Manual approval') {
println("[BBAction Trigger] Setting MPAStatus from '${MPAStatus_c}' to 'Manual approval'")
MPAStatus_c = 'Manual approval'
} else {
println("[BBAction Trigger] MPAStatus already 'Manual approval' - no change needed")
}
// Set RecoverableFlagV1_c to 'N'
if (RecoverableFlagV1_c != 'N') {
println("[BBAction Trigger] Setting RecoverableFlagV1 from '${RecoverableFlagV1_c}' to 'N'")
RecoverableFlagV1_c = 'N'
} else {
println("[BBAction Trigger] RecoverableFlagV1 already 'N' - no change needed")
}
println("[BBAction Trigger] Section 7 completed successfully")
}
} else {
println("[BBAction Trigger] IncentiveType not BONUS - skipping sections 6 & 7")
}
}
// ============================================================================
// SECTION 8 & 9: REC Payout Adjustment with Complex Conditions
// Action Code: MAV_DIR_BB_ACTION_1011
// ============================================================================
if (BBActionManual_c == 'MAV_DIR_BB_ACTION_1011') {
println("[BBAction Trigger] Action: REC Payout Adjustment (Complex)")
println("[BBAction Trigger] IncentiveType: ${IncentiveType_c}")
println("[BBAction Trigger] HRStatus: ${HRStatus_c}")
println("[BBAction Trigger] EmploymentCountry: ${EmploymentCountry_c}")
println("[BBAction Trigger] SalesRP: ${SalesRP_c}")
println("[BBAction Trigger] CED: ${CED_c}")
// Verify the Incentive Type condition (COMMISSION or BONUS)
if (IncentiveType_c == 'COMMISSION' || IncentiveType_c == 'BONUS') {
// SECTION 8: HRStatus='T', Country!='RO', SalesRP='Y', CED<0
if (HRStatus_c == 'T' && EmploymentCountry_c != 'RO' && SalesRP_c == 'Y' && (CED_c ?: 0) < 0) {
println("[BBAction Trigger] Section 8: HRStatus='T', Country!='RO', SalesRP='Y', CED<0")
println("[BBAction Trigger] Clearing BBReasonCode and BBMPAComment")
BBMPAComment_c = null
BBReasonCode_c = null
MPAReasonCode_c = null
// Calculate reverse of CED: (-1) * CED_c
def reverseCED = -1 * (CED_c ?: 0)
println("[BBAction Trigger] Calculated reverseCED: ${reverseCED}")
// Set MPAGenerated only if value is different (avoid validation threshold)
if (MPAGenerated_c != reverseCED) {
println("[BBAction Trigger] Setting MPAGenerated from ${MPAGenerated_c} to ${reverseCED}")
MPAGenerated_c = reverseCED
} else {
println("[BBAction Trigger] MPAGenerated already equals ${reverseCED} - no change needed")
}
// Set ExpectedPaymentAmount to CED_c
println("[BBAction Trigger] Setting ExpectedPaymentAmount to CED: ${CED_c}")
ExpectedPaymentAmount_c = CED_c
// Set MPAStatus_c to 'Manual approval'
if (MPAStatus_c != 'Manual approval') {
println("[BBAction Trigger] Setting MPAStatus from '${MPAStatus_c}' to 'Manual approval'")
MPAStatus_c = 'Manual approval'
} else {
println("[BBAction Trigger] MPAStatus already 'Manual approval' - no change needed")
}
// Set RecoverableFlagV1_c to 'Y'
if (RecoverableFlagV1_c != 'Y') {
println("[BBAction Trigger] Setting RecoverableFlagV1 from '${RecoverableFlagV1_c}' to 'Y'")
RecoverableFlagV1_c = 'Y'
} else {
println("[BBAction Trigger] RecoverableFlagV1 already 'Y' - no change needed")
}
println("[BBAction Trigger] Section 8 completed successfully")
}
// SECTION 9: HRStatus='A', Country!='RO', SalesRP='N', CED<0
if (HRStatus_c == 'A' && EmploymentCountry_c != 'RO' && SalesRP_c == 'N' && (CED_c ?: 0) < 0) {
println("[BBAction Trigger] Section 9: HRStatus='A', Country!='RO', SalesRP='N', CED<0")
println("[BBAction Trigger] Clearing BBReasonCode and BBMPAComment")
BBMPAComment_c = null
BBReasonCode_c = null
MPAReasonCode_c = null
// Calculate reverse of CED: (-1) * CED_c
def reverseCED = -1 * (CED_c ?: 0)
println("[BBAction Trigger] Calculated reverseCED: ${reverseCED}")
// Set MPAGenerated only if value is different (avoid validation threshold)
if (MPAGenerated_c != reverseCED) {
println("[BBAction Trigger] Setting MPAGenerated from ${MPAGenerated_c} to ${reverseCED}")
MPAGenerated_c = reverseCED
} else {
println("[BBAction Trigger] MPAGenerated already equals ${reverseCED} - no change needed")
}
// Set ExpectedPaymentAmount to CED_c
println("[BBAction Trigger] Setting ExpectedPaymentAmount to CED: ${CED_c}")
ExpectedPaymentAmount_c = CED_c
// Set MPAStatus_c to 'Manual approval'
if (MPAStatus_c != 'Manual approval') {
println("[BBAction Trigger] Setting MPAStatus from '${MPAStatus_c}' to 'Manual approval'")
MPAStatus_c = 'Manual approval'
} else {
println("[BBAction Trigger] MPAStatus already 'Manual approval' - no change needed")
}
// Set RecoverableFlagV1_c to 'Y'
if (RecoverableFlagV1_c != 'Y') {
println("[BBAction Trigger] Setting RecoverableFlagV1 from '${RecoverableFlagV1_c}' to 'Y'")
RecoverableFlagV1_c = 'Y'
} else {
println("[BBAction Trigger] RecoverableFlagV1 already 'Y' - no change needed")
}
println("[BBAction Trigger] Section 9 completed successfully")
}
} else {
println("[BBAction Trigger] IncentiveType not COMMISSION or BONUS - skipping sections 8 & 9")
}
}
// ============================================================================
// SECTION 10 & 11: BONUS with Country-Specific Rules & Lookup Validation
// Action Code: MAV_DIR_BB_ACTION_1012
// ============================================================================
if (BBActionManual_c == 'MAV_DIR_BB_ACTION_1012') {
println("[BBAction Trigger] Action: BONUS Country-Specific Rules")
println("[BBAction Trigger] IncentiveType: ${IncentiveType_c}")
println("[BBAction Trigger] HRStatus: ${HRStatus_c}")
println("[BBAction Trigger] EmploymentCountry: ${EmploymentCountry_c}")
println("[BBAction Trigger] SalesRP: ${SalesRP_c}")
println("[BBAction Trigger] BeginningBalance: ${BeginningBalance_c}")
// --- START: LOOKUP SCD VALIDATION ---
String lookupDesc = null // Initialize (Assumed: '1' for enabled, '0' for disabled)
def lookupType = 'MTQ_ICM_BB_COUNTRY_LKP'
def lookupCode = EmploymentCountry_c
// Only proceed if we have a country code
if (lookupCode != null) {
println("[BBAction Trigger] Lookup Attempt: VO='CommonLookup', Type=${lookupType}, Code=${lookupCode}")
def voLookUp = newView("CommonLookup")
def str1SearchExpression = "LookupType = '${lookupType}' AND LookupCode = '${lookupCode}'"
voLookUp.appendViewCriteria(str1SearchExpression)
voLookUp.executeQuery()
if (voLookUp.getEstimatedRowCount() > 0) {
def rowLookup = voLookUp.first()
// Retrieve Description (assuming this is the SCD status: '0' or '1')
lookupDesc = nvl(rowLookup?.Description, "")
// Per user request, check Description against string '0'
if (lookupDesc == '0') {
println("[BBAction Trigger] VALIDATION FAILED: SCD not enabled.")
throw new oracle.jbo.ValidationException("SCD not enabled for employment country " + EmploymentCountry_c);
}
println("[BBAction Trigger] Lookup Successful. SCD Status (Description): ${lookupDesc}")
} else {
println("[BBAction Trigger] Lookup Failed: No matching row found. Assuming SCD is enabled by default.")
// If no lookup found, the validation will not be triggered.
}
// Clean up the VO (good practice)
voLookUp.reset()
} else {
println("[BBAction Trigger] EmploymentCountry is null. Skipping SCD check.")
}
// --- END: LOOKUP SCD VALIDATION ---
// Verify the Incentive Type condition (BONUS only)
if (IncentiveType_c == 'BONUS') {
// SECTION 10: HRStatus='A', SalesRP='Y', BB<0 (Country exclusion logic removed as per user's source code modification)
if (HRStatus_c == 'A' && SalesRP_c == 'Y' && (BeginningBalance_c ?: 0) < 0) {
println("[BBAction Trigger] Section 10: HRStatus='A', SalesRP='Y', BB<0")
println("[BBAction Trigger] Clearing BBReasonCode and BBMPAComment")
BBMPAComment_c = null
BBReasonCode_c = null
MPAReasonCode_c = null
// Set ExpectedPaymentAmount to null (analyst to input)
println("[BBAction Trigger] Setting ExpectedPaymentAmount to null (analyst input required)")
ExpectedPaymentAmount_c = null
// Set MPAStatus_c to 'Manual approval'
if (MPAStatus_c != 'Manual approval') {
println("[BBAction Trigger] Setting MPAStatus from '${MPAStatus_c}' to 'Manual approval'")
MPAStatus_c = 'Manual approval'
} else {
println("[BBAction Trigger] MPAStatus already 'Manual approval' - no change needed")
}
// Set RecoverableFlagV1_c to 'Y'
if (RecoverableFlagV1_c != 'Y') {
println("[BBAction Trigger] Setting RecoverableFlagV1 from '${RecoverableFlagV1_c}' to 'Y'")
RecoverableFlagV1_c = 'Y'
} else {
println("[BBAction Trigger] RecoverableFlagV1 already 'Y' - no change needed")
}
println("[BBAction Trigger] Section 10 completed successfully")
}
/* SECTION 11 LOGIC WAS COMMENTED OUT IN SOURCE, REMAINS COMMENTED HERE
def specificCountries = ['KR', 'KZ']
if (HRStatus_c == 'A' && (EmploymentCountry_c in specificCountries) && SalesRP_c == 'Y' && BeginningBalance_c < 0) {
// ... logic ...
}
*/
}
else {
println("[BBAction Trigger] IncentiveType not BONUS - skipping sections 10 & 11")
}
}
println("[BBAction Trigger] ========== Trigger execution completed ==========")
Comments
Post a Comment